Login

Cart

Your cart is empty
Green oval ring on a split infinity shank worn on a finger
Green oval in a floral setting on a split gold shank
Model wearing the green split shank ring, hand at her cheek
Green oval ring on a split infinity shank on a plain background
Green oval ring on a split infinity shank on a model's finger
Birthstone colour options available for this design
Green oval ring on a split infinity shank photographed from another angle
Green oval ring on a split infinity shank worn on a hand
Specification graphic: stone sizes, band width and karat options
Green oval ring on a split infinity shank on a model's finger
Green oval ring on a split infinity shank photographed from another angle
FAQ graphic: gold types, sizing, delivery and care information
Cristo Juanna gift box held in both hands, stacked gold rings on the fingers

Oval Green Split Shank Ring, Lisbeth

Sale price$168.00
Material

Material
Ring size
Ring Size Guide

Every ring is made to order in the size you choose, so the size matters more here than it does on a shelf. This page has two ways to measure at home and the full conversion table. If you land between two sizes, tell us and we will talk it through before we start cutting.

Measure a ring you already wear

This is the more reliable of the two methods. Take a ring that fits the finger you have in mind and measure the inside diameter across the widest point with a ruler that has millimetres on it. Match that number to the inside diameter column in the table below.

Measure the inside edge to inside edge, not the outside of the band. A 1 mm error at this step is roughly half a ring size.

Measure the finger

Cut a strip of paper about 5 mm wide, or use a length of string. Wrap it around the base of the finger, snug but not tight, mark where it overlaps, then lay it flat and measure to the mark in millimetres. That figure is the inside circumference — the second column in the table.

Do this at the end of the day when the hand is at its largest, and not straight after exercise or a cold walk. Fingers change size through the day by up to half a size.

Two things that change the answer

  • Wide bands run tight. Anything over about 4 mm wide takes up more of the finger. On a wide band go a quarter size up.
  • A large knuckle wins. The ring has to pass the knuckle, so measure there too and take the larger of the two readings. If the gap is more than a full size, write to us — that is a fit problem we can design around.

What we make

We cut US sizes 3 through 10 1/2 as standard, in quarter steps. That covers the great majority of hands. Outside that range is not a problem, it is just not on the dropdown — write to us with the size and we will quote it.

Ring size conversion table

Inside diameter and inside circumference are the two measurements you can take at home. The remaining columns are the national sizing systems, in case the ring you measured was bought elsewhere.

Ring size conversions — US and Canada, British and Australian, French and Russian, German, Japanese, Swiss
US & Canada Inside circumference (mm) Inside circumference (in) Inside diameter (mm) Inside diameter (in) British & Australian French & Russian German Japanese Swiss
3 44.14 1.74 14.05 0.553 F 44 14 4 4
3 1/8 44.45 1.75 14.15 0.557 F 1/2 – – – –
3 1/4 44.77 1.76 14.25 0.561 F 3/4 – – – –
3 3/8 45.11 1.77 14.36 0.565 G 45 1/4 – 5 5 1/4
3 1/2 45.40 1.79 14.45 0.569 G 1/4 – 14 1/2 – –
3 5/8 45.74 1.80 14.56 0.573 G 1/2 – – 6 –
3 3/4 46.02 1.81 14.65 0.577 H 46 1/2 – – 6 1/2
4 46.68 1.84 14.86 0.585 H 1/2 – 15 7 –
4 1/4 47.25 1.86 15.04 0.592 I 47 3/4 – – 7 3/4
4 1/2 47.97 1.89 15.27 0.601 I 1/2 – 15 1/4 8 –
4 5/8 48.38 1.90 15.40 0.606 J 49 15 1/2 – 9
4 3/4 48.79 1.92 15.53 0.611 J 1/4 – – – –
5 49.32 1.94 15.70 0.618 J 1/2 – 15 3/4 9 –
5 1/8 49.64 1.95 15.80 0.622 K 50 – – 10
5 1/4 49.95 1.97 15.90 0.626 K 1/4 – – – –
5 3/8 50.27 1.98 16.00 0.630 K 1/2 – – 10 –
5 1/2 50.58 1.99 16.10 0.634 L 51 3/4 16 – 11 3/4
5 3/4 51.21 2.02 16.30 0.642 L 1/4 – – – –
5 7/8 51.55 2.03 16.41 0.646 L 1/2 – – – –
6 51.87 2.04 16.51 0.650 M 52 3/4 16 1/2 12 12 3/4
6 1/4 52.50 2.07 16.71 0.658 M 1/2 – – – –
6 1/2 53.16 2.09 16.92 0.666 N 54 17 13 14
6 3/4 53.82 2.12 17.13 0.674 N 1/2 – – – –
7 54.51 2.15 17.35 0.683 O 55 1/4 17 1/4 14 15 1/4
7 1/4 54.82 2.16 17.45 0.687 O 1/2 – – – –
7 1/2 55.76 2.20 17.75 0.699 P 56 1/2 17 3/4 15 16 1/2
7 3/4 56.45 2.22 17.97 0.707 P 1/2 – – – –
8 57.15 2.25 18.19 0.716 Q 57 3/4 18 16 17 3/4
8 1/4 57.65 2.27 18.35 0.722 Q 1/2 – – – –
8 1/2 58.21 2.29 18.53 0.729 Q 3/4 – 18 1/2 17 –
8 5/8 58.47 2.30 18.61 0.733 R 59 – – 19
8 3/4 58.72 2.31 18.69 0.736 R 1/4 – – – –
8 7/8 59.06 2.32 18.80 0.740 R 1/2 – – – –
9 59.34 2.35 18.89 0.748 R 3/4 – 19 18 –
9 1/8 60.00 2.36 19.10 0.752 S 60 1/4 – – 20 1/4
9 1/4 60.38 2.38 19.22 0.757 S 1/4 – – – –
9 3/8 60.66 2.39 19.31 0.760 S 1/2 – – – –
9 1/2 60.98 2.40 19.41 0.764 S 3/4 – 19 1/2 19 –
9 5/8 61.29 2.41 19.51 0.768 T 61 1/2 – – 21 1/2
9 3/4 61.64 2.43 19.62 0.772 T 1/4 – – – –
10 62.33 2.45 19.84 0.781 T 1/2 – 20 20 –
10 1/4 62.89 2.48 20.02 0.788 U 62 3/4 – 21 22 3/4
10 1/2 63.46 2.50 20.20 0.797 U 1/2 – 20 1/4 22 –
10 5/8 63.84 2.51 20.32 0.800 V 63 – – 23 3/4
10 3/4 64.21 2.53 20.44 0.805 V 1/4 – – – –
11 64.97 2.56 20.68 0.814 V 1/2 – 20 3/4 23 –

Ring size conversion chart: millimetres, inches, US, British, French, German, Japanese and Swiss sizes

If the fit is wrong when it arrives

Resizing is free, and we cover the shipping in both directions. Write to us with your order number and the size you want instead. Most pieces can be resized; a few, like full eternity bands and some deco settings, are cleaner to remake — either way it costs you nothing.

You have 30 days from delivery. See the refund policy for the full terms, or the FAQ for the short version.

Ring size
Made to order in 6-9 business days
Delivered in 9-17 business days total

Order today, arrives Sep 24 – Oct 6

  • Made to order in 6-9 business days · delivered in 9-17 business days total
  • Made by hand, then shipped from Cromwell, Connecticut
  • Free U.S. shipping, no minimum · express $15
  • Free returns and exchanges within 30 days · free resizing and engraving

An oval in green, 6 by 4 mm, raised over a split shank that opens into a lace of eight 1 mm stones before it reaches the setting. The band is 1.0 mm wide and 0.9 mm thick, kept deliberately fine so the openwork stays light. Cubic zirconia as standard, with emerald green cubic zirconia or moissanite available on request. Made to order in solid 10K, 14K, or 18K gold.

Materials

  • Solid gold, never plated — 10K, 14K, 18K in rose, white, yellow gold
  • Stone: Cubic Zirconia (standard)
  • Stone upgrades: can be upgraded to natural diamond, lab-grown diamond or moissanite — contact us before ordering

Dimensions

  • Band width: 1 mm
  • Band thickness: 0.9 mm
  • Center stone: 1 × 6 × 4 mm oval
  • Accent stones: 8 × 1 mm round
  • These are real measurements. Product photos are enlarged to show detail.

The centre stone is AAA Cubic Zirconia (Emerald Green), an oval cut. It is cut in solid Gold (10K, 14K, 18K), in yellow, white or rose, hallmarked inside the band and never plated. The finished piece weighs about 1 grams in 14K; 10K runs a little lighter and 18K a little heavier. You will also find it in Engagement Rings, Cubic Zirconia Rings and May Birthstone Rings.

Questions about this piece
Green oval ring on a split infinity shank worn on a finger
Oval Green Split Shank Ring, Lisbeth Sale price$168.00

Recently viewed

Since 2023

Made by hand in New Jersey, one order at a time

Over 6,300 orders shipped. Solid 10K, 14K and 18K gold — never plated, never gold filled. Nothing here exists before you order it.

Read our FAQ